Frequently Asked Questions

How Much Does it Cost?

The answer to this depends on your personal situation.  We will work to give you the best deal and most discounts available depending on your details, as well as offer financing and other payment options to get you the best deal in the market.  Contact Us Now

Why does the Raizer not run, even if the up/down arrows are pressed?

1. The stop button is activated (2-tone alarm)

Turn the stop button in the direction of the arrows and it will click out.

Raizer Stop button

Check that the ready-for-use LED is lit green.

Raizer Ready for use LED lit green

 

2. The rear legs are not correctly fitted (2-tone alarm)

Check that the ready-for-use LED is lit green.

Raizer Ready for use LED lit green

If not: Fit the rear legs so that they click completely into the shaft.

 

3. The Raizer is overloaded (2-tone alarm)

Remove the load from the Raizer.

 

4. The battery is depleted

Raizer Low battery status

Charge the Raizer battery.

– This will only light when the chair is powered on.

Why does the Raizer run askew when the up/down are pressed?

The legs are not fitted in parallel.

Fit left and right rear legs so they are in parallel.

Correct vs incorrect assembly of Raizer

Why does the Raizer stop at the top position?

The chair has reached the top stop (long beep).

Completely normal.

The chair has reached its max height.

Why does the remote control not work?

Raizer Remote control

The Raizer is not powered on / activated

Briefly press the up or down buttons on the side of the device.

Raizer Up and down arrows

How to reset transmitter and receiver:

To reset a remote control so it is no longer associated with a particular Raizer, do as follows:

  1. Press the UP (↑) and DOWN (↓) buttons on the remote control at the same time and hold them down for approx. 5 seconds until the control LED on the remote control begins to flash slowly.The remote control is now in installation mode for 2 minutes.
  2. Perform the following within the 2 minutes:

Press: UP (↑), UP (↑), DOWN (↓), DOWN (↓), UP (↑), DOWN (↓), UP (↑), DOWN (↓).

When the control LED starts to flash quickly, the remote control is no longer associated with a particular lifting chair.

How do I pair transmitter and receiver?

Pairing of extra remote control:

Only to be performed if there is more than one remote-controlled Raizerwithin the operational area of the remote control.

  1. Ensure that there is power to the Raizer.
  2. The Raizer must be switched off. The device will switch off automatically after 10 minutes without use (it will emit a long beep before powering down).
  3. Press the UP (↑) and DOWN (↓) buttons on the remote control at the same time and hold them down for approx. 5 seconds until the control LED on the remote control begins to flash slowly.The remote control is now in installation mode for 2 minutes.
  4. Within these 2 minutes switch on the lifting chair you require associated with the remote control. Press the up/down arrows on the side of the chair.
  5. The control LED on the remote control is associated with the lifting chair when it stops flashing.
  6. Test the system so as to ensure the pairing has been performed correctly; if not, repeat 1-5 above.

HOME      PRODUCT      ABOUT     CONTACT

CareCredit Button ApplyNow 350x213 a v1

ABOUT

About Raizer Lift Chair by Rescue Lift | Mobile Lifting Chair
About Raizer Lift Chair by Rescue Lift | Mobile Lifting Chair

Rescue Lift and Liftup have cooperated with a partner in design and innovation during the development process to achieve the exclusive expression of the Raizer. All the materials are carefully selected with focus on stability and durability and in consideration of both the helper and the fallen person.

A person who has fallen and can not get up again is raised comfortably up to a sitting or almost standing position in a way that supports the entire body throughout the process. This way of lifting shows consideration for the importance of being helped up in a dignified and safe way.

Ergonomic benefits

Raizer, the state of the art lifting chair, is used by personnel in home care as well as for ambulance services and all personnel working with lifting and moving of individuals with reduced mobility in general. The helper can without assistance handle the Raizer and the person on the floor with minimal physical effort, thus lifting and moving don't put the assistant's back, arms, etc. at risk.

Easy to transport

Raizer is to be disassembled after use and thus easily transported and used anywhere and in any situation. This innovative aid for lifting and moving allows the assistant to help a fallen person to sit or stand in a few minutes (including the assembly) from arrival on site.

Simple handling

Raizer is carried disassembled to the place where it is to be used and is battery operated via a remote control.

Exclusive design

Rescue Lift has cooperated with a partner in design and innovation during the development process to achieve the exclusive expression of the Raizer. All the materials are carefully selected with focus on stability and durability and in consideration of both the helper and the fallen person.

Find a distributor for more information about Raizer, prices, delivery time etc.

Ergonomic benefits

Raizer, the state of the art lifting chair, is used by personnel in home care as well as for ambulance services and all personnel working with lifting and moving of individuals with reduced mobility in general. The helper can without assistance handle the Raizer and the person on the floor with minimal physical effort, thus lifting and moving don't put the assistant's back, arms, etc. at risk.

Easy to transport

Raizer is to be disassembled after use and thus easily transported and used anywhere and in any situation. This innovative aid for lifting and moving allows the assistant to help a fallen person to sit or stand in a few minutes (including the assembly) from arrival on site.

Simple handling

Raizer is carried disassembled to the place where it is to be used and is battery operated via a remote control.

Exclusive design

Rescue Lift has cooperated with a partner in design and innovation during the development process to achieve the exclusive expression of the Raizer. All the materials are carefully selected with focus on stability and durability and in consideration of both the helper and the fallen person.

Find a distributor for more information about Raizer, prices, delivery time etc.

Ergonomic benefits

Raizer, the state of the art lifting chair, is used by personnel in home care as well as for ambulance services and all personnel working with lifting and moving of individuals with reduced mobility in general. The helper can without assistance handle the Raizer and the person on the floor with minimal physical effort, thus lifting and moving don't put the assistant's back, arms, etc. at risk.

Easy to transport

Raizer is to be disassembled after use and thus easily transported and used anywhere and in any situation. This innovative aid for lifting and moving allows the assistant to help a fallen person to sit or stand in a few minutes (including the assembly) from arrival on site.

Simple handling

Raizer is carried disassembled to the place where it is to be used and is battery operated via a remote control.

Exclusive design

Rescue Lift has cooperated with a partner in design and innovation during the development process to achieve the exclusive expression of the Raizer. All the materials are carefully selected with focus on stability and durability and in consideration of both the helper and the fallen person.

Find a distributor for more information about Raizer, prices, delivery time etc.

canstockphoto7931572
Raizer®
  • Mobile lifting chair for transfer from floor to a sitting or standing position
  • Minimal physical effort for the assistant
  • Both citizen and assistant can feel safe in the process
  • Easy to transport in 2 light bags
  • Assembly prior to operation: max 3 minutes
  • Comfortable and safe for the person on the floor
  • Safe working load: 150 kgs.
  • Seat: Width 47 cm depth 22 cm.
  • Battery capacity: approx. 100 transfers before charging
  • Cleaning-friendly